https://www.prolabworld.in Latest Products Sun, 19 Jul 2026 20:08:07 +0530 en-us https://www.prolabworld.in https://www.prolabworld.in/micro-balances.htm https://www.prolabworld.in/micro-balances.htm Sat, 14 Mar 2026 00:00:00 +0530 Prolab India Offers: Advanced Touchscreen Glp/gmp/21 cfr Compliance Micro Balance With Infrared Sensors for Handsfree Operation.radwag Mya 4y Series Micro-balances is designed to meet the highest requirements for determination of mass.measurement reliability and accuracy are maintained by system of automatic internal adjustment / calibration.   Capacity: 5g Readability: 1 µg (0. 001mg/0. 000001g) Micro balances comprise two major components (an electronic module and a precise mechanical measuring system are enclosed separately).The design eliminates the influence of heat sourcing from instrument's electronics on its mechanical components and additionally protects it from shocks and brations caused by users operating the instrument.All the elements of a micro balance are made of glass and steel which eliminates the influence of electrostatics on weighing process.   Functions: Dosing, check-weighing, percent setup, statistics, formulation, glp procedures auto test, infrared sensors.   Infrared proximity sensors: optional functions: print function, tare function, sensor's sensitivity adjustment.   Electronic level indicator: Functions: alarm function, graphic level indicator, programmable acceptable tilts   Data exchange through usb storage devices : update balance software, export weighing data, export/import of data bases,export/import of balance settings, exchange data between balances.   Communication interfaces: Ethernet, 2×rs 232, 2×usb, additional display port. https://www.prolabworld.in/semi-micro-balances.htm https://www.prolabworld.in/semi-micro-balances.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/analytical-semi-micro-balance.htm https://www.prolabworld.in/analytical-semi-micro-balance.htm Sat, 14 Mar 2026 00:00:00 +0530 As.r Analytical Balance Features : Databases In R Series Balances: In new AS.R series balances the information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis.   The data is registered in 5 databases: users (up to 10 users),- products (up to 1000 products),- weighments (up to 1000 weighments),- tares (up to 10 tares),- ALIBI memory (up to 100 000 weighments). There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives.   Quick access to information: Direct access to functions and databases is possible from the level of keyboard.Database – a direct access to databasisFunction - a direct access to the basic functionsF1 to F4 – programmable function and navigation keys on the menu   ALIBI memory: The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period.   Calibration: Automatic Internal Time & Temperature Controlled Calibration With External & User Calibration Facility.    GLP/GMP : GLP/GMP Compliance With Working Data Base With Inbuilt Date & Time   Large easy to read LCD: New LCD display with enlarged characters allows for a clearer display of measurement results.   Auto-Cal System: Auto-Cal system is a tool for control and correction, which allows accurate weighing regardless of changes in temperature, the position of the balance or changing environmental conditions.   Operating temperature range: A wide operating temperature range does not require continuous monitor and control of room temperature, which affects the accuracy of the balance.   Easy exchange of data: Exchange of data within the system takes place bidirectionally with the use of fast USB connection. New balances enable importing and exporting of databases to external Pendrives.   Fast access to information: Direct access to functions and databases is possible through the quick access buttons on the display. Database - direct access to database Function - direct access to basic functions F1 do F4 - programmable function buttons and menu navigation   Communication interface: The exchange of database information between the devices has become even easier thanks to two USB ports (type A and B) and Wi-Fi technology.   Additional information line: New information line allows for additional messages and information, for instance: product name or tare value.   Configurable printouts: In the new R-series balances the weighment reports are divided into 3 configurable sections, each of which can be fully customized content-wise.   PCL: The new R-series balances work with the printers that support PCL protocol. The printers are connected with the balances via USB port. https://www.prolabworld.in/touch-screen-semi-micro-balance.htm https://www.prolabworld.in/touch-screen-semi-micro-balance.htm Mon, 19 Jul 2021 00:00:00 +0530 Infrared proximity sensors Print function Tare function Opening weighing chambers Sensors’ sensitivity   Data exchange through usb storage devices Export weighing data Export/import databases Export/import balance settings Exchanging data between balances   Communication interfaces Ethernet 10/100 mbps Rs 232 2×usb 2. 0 4 in/out   Features: Glp gmp compliance Parts counting Checkweighing Density determination Filling Animal weighing Formulation Percent setup Statistics Infrared sensors Pipette calibration https://www.prolabworld.in/analytical-balances.htm https://www.prolabworld.in/analytical-balances.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/electronic-analytical-balance.htm https://www.prolabworld.in/electronic-analytical-balance.htm Sat, 14 Mar 2026 00:00:00 +0530 Features : Databases In R Series Balances: In new AS.R series balances the information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users),- products (up to 1000 products),- weighments (up to 1000 weighments),- tares (up to 10 tares),- ALIBI memory (up to 100 000 weighments). There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Quick access to information:Direct access to functions and databases is possible from the level of keyboard.Database – a direct access to databasisFunction - a direct access to the basic functionsF1 to F4 – programmable function and navigation keys on the menu ALIBI memory:The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Calibration:Automatic Internal Time & Temperature Controlled Calibration With External & User Calibration Facility. GLP/GMP :Glp/gmp Compliance With Working Data Base With Inbuilt Date & Time Large easy to read LCD:New LCD display with enlarged characters allows for a clearer display of measurement results. Auto-Cal System:Auto-Cal system is a tool for control and correction, which allows accurate weighing regardless of changes in temperature, the position of the balance or changing environmental conditions Operating temperature range:A wide operating temperature range does not require continuous monitor and control of room temperature, which affects the accuracy of the balance. Easy exchange of data:Exchange of data within the system takes place bidirectionally with the use of fast USB connection. New balances enable importing and exporting of databases to external Pendrives.   Fast access to information: Direct access to functions and databases is possible through the quick access buttons on the display. Database - direct access to database Function - direct access to basic functionsF1 do F4 - programmable function buttons and menu navigation   Communication interface: The exchange of database information between the devices has become even easier thanks to two USB ports (type A and B) and Wi-Fi technology. https://www.prolabworld.in/mettler-analytical-balance.htm https://www.prolabworld.in/mettler-analytical-balance.htm Fri, 03 Jan 2025 00:00:00 +0530 Standard Features: ME balances are built to last. The solid construction and high quality materials ensure you can rely on accurate results for many years to come. Solid metal base Reinforced body Overload protection up to 100 kg Simply Reliable State-of-the-art weighing technology ensures stable and accurate results. Fast and reliable results Date and time stamp (ISO/GLP) The easy-to-use interface enables direct access to applications and calibration routines. Coupled with easy cleaning, your daily tasks are fast and efficient. Intuitive interface 10 built-in applications Rounded edges and smooth surfaces are easy-to-clean   Applications: Formulation, Totaling, Dynamic Weighing, Piece Counting, Density, Percent Weighing, Check Weighing, Statistics Free Factor. https://www.prolabworld.in/moisture-balances.htm https://www.prolabworld.in/moisture-balances.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/moisture-balance.htm https://www.prolabworld.in/moisture-balance.htm Sat, 14 Mar 2026 00:00:00 +0530 Features: Fast results Full visualization Easy cleaning and long service life Error-free operations   Moisture analyzer series MAR features: Easy operation provided by backlit LCD display Drying profile (standard, mild, step, rapid). Finish mode (manual, humidity stabilization, automatic, time defined). GLP/GMP printouts and reports Halogen or infrared lamps Standard and non-standard applications Optimization of work ensured by halogen lamps mode Maximal capacity of a moisture analyzer series MAC is 210 g /1 mg. Maximal drying temperature is 160°C (an extra cost option is a moisture analyzer with drying temperature upgraded to 250°C). https://www.prolabworld.in/infrared-moisture-balance.htm https://www.prolabworld.in/infrared-moisture-balance.htm Sat, 14 Mar 2026 00:00:00 +0530 https://www.prolabworld.in/spectrophotometer.htm https://www.prolabworld.in/spectrophotometer.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/single-beam-uv-visible-spectrophotometer-with-pc-controlled-software.htm https://www.prolabworld.in/single-beam-uv-visible-spectrophotometer-with-pc-controlled-software.htm Fri, 03 Jan 2025 00:00:00 +0530 Features: Unique optical system, 1200 lines/mm grating and imported receiver to ensure its sound performance. The instrument has PC connectivity software expands the capabilities of the instrument includes Photometric analysis, Quantitative analysis, Spectral scanning, Kinetics, DNA/protein analysis, Multi-wavelength test, etc. Adopts 51 microcomputer system, and store 200 test data and 100 standard curves; Plug type deuterium lamp and tungsten lamp transfer light without optics debugging.   Applications:  Pharmaceutical Industry Environment Monitoring Commodity Inspection Food Inspection Agricultural Chemistry Teaching in Colleges & Universities Metallurgy Geology Machine Manufacturing Petrochemical Industries Water and waste water Labs Food and Beverages Labs   STANDARD CONFIGURATION Main Set -01NO USB Cable -01NO Accessory kit, Including a 4 glass cell-01NO Quartz Cell -01NO Operating Manual Software Manual -01NO Dust Cover - 01NO Software CD -01NO Software Key -01NO https://www.prolabworld.in/double-beam-uv-visible-spectrophotometer-with-pc-controlled-software.htm https://www.prolabworld.in/double-beam-uv-visible-spectrophotometer-with-pc-controlled-software.htm Fri, 03 Jan 2025 00:00:00 +0530 FEATURES: Double beam optical system Low noise and Low stray light Large LCD display, can display curve High quality grating, detector and lamps Data and Curve can be stored in real-time Auto setting WL, auto Blank Lamps can be turned on/off individually Easy to change Pri-aligned lamps Reinforced baseboard and bracket assures durability   FUNCTIONS:  Photometric: T%, Abs Quantitative: Standard Curve System Utility WL Scan (Spectrum Scan) Time Scan (Kinetics) DNA/Protein Test https://www.prolabworld.in/visible-spectrophotometer-with-pc-controlled-software.htm https://www.prolabworld.in/visible-spectrophotometer-with-pc-controlled-software.htm Thu, 15 Jul 2021 00:00:00 +0530 FEATURES:  MULTIPLE RESULTS READOUT Can display wavelength, abosption and transmittance with 5 results per screen. It also has a memory store of up to 200 results. AUTO SETTING WAVELENGTH Users set wavelength automatically through arrow keys to avoid operation errors. 2.5’ LCD SCREEN Equipped with a 2.5 LCD screen to give a clear display of standard curves and group of results.   STANDARD ACCESSORIES Spectrophotometer -01NO  Power Cord -01NO Software CD -01NO 10mm Glass Cuvette - 04NO Instruction Manual - 01NO Dust Cover- 01NO   Applications Pharmaceutical Industry Environment Monitoring Commodity Inspection Food Inspection Agricultural Chemistry Teaching in Colleges & Universities Metallurgy Geology Machine Manufacturing Petrochemical Industries Water and waste water Labs Food and Beverages Labs https://www.prolabworld.in/tablet-hardness-testers.htm https://www.prolabworld.in/tablet-hardness-testers.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/ecotab-digital-tablet-hardness-tester.htm https://www.prolabworld.in/ecotab-digital-tablet-hardness-tester.htm Thu, 15 Jul 2021 00:00:00 +0530 Tablet hardness testing, is a laboratory technique used y the pharmaceutical industry to test the breaking point and structural integrity of a tablet under conditions of storage, transportation, and handling before use. The breaking point of a tablet is based on its shape.   To ensure that pharmaceutical pills and tablets have the ideal casing, a tablet hardness tester is required to accurately analyse the mechanical integrity of a table.   Features: Table hardness measurement by load cell Hardness measuring range up to 500N Units of measurement in N, Kg, Lb. Battery operated (15hrs after full charge) Easy to Operate https://www.prolabworld.in/tabtest101-digital-tablet-hardness-tester.htm https://www.prolabworld.in/tabtest101-digital-tablet-hardness-tester.htm Thu, 15 Jul 2021 00:00:00 +0530 The PROLAB INDIA Portable Tablet Hardness Tester comes with compact size and High Accuracy. It can be used to measure the tablet Hardness. It is easy to operate and handy to carry out The force gauge can display the test direction. It has the blue background light. The tester can set the Upper and Lower limit Deviation value to judge the measured results. It has the red/green indicator lamp and buzzer which can alarm automatically with sound and light.   The Portable Tablet Hardness Tester can store 10 test value and calculate the average of the stored test value automatically. It can convert three Units (N,Kgf,lbf) automatically. The data can roll over on the screen. Peak-Holding function, Peak-Automatic Discharge function and the discharge time can be set freely. This hardness tester has the RS-232 port output. It has the curved test function if it connects to the printer. If it connects to test stand, it can make the test stand stop moving when it reaches preset stop value.   FEATURES: Compatibility: Compact size and High Accuracy. It is easy to operate and handy to carry out. Real time Data Transfer: It can give the real time test results through RS-232 to PC. It can plot the test results in real time graph through corresponding software. Unit selection & Conversion: Convert three Units (N,Kgf,lbf) automatically. Parameter Measurements: The Portable Tablet Hardness Tester Measures the Hardness value of the tablets. Sequence Indicators: The portable Tablet Hardness Tester can set the Upper and Lower limit Deviation value to judge the measured results. It has the red/green indicator lamp and buzzer which can alarm automatically with sound and light. Display: LCD with Backlit Display. Results Storage: This Portable Tablet Hardness Tester can store 10 test value and calculate the average of the stored test value automatically. https://www.prolabworld.in/portab-digital-tablet-hardness-tester.htm https://www.prolabworld.in/portab-digital-tablet-hardness-tester.htm Thu, 15 Jul 2021 00:00:00 +0530 The PROLAB INDIA Portable Tablet Hardness Tester comes with compact size and High Accuracy. It can be used to measure the tablet Hardness. It is easy to operate and handy to carry out The force gauge can display the test direction. It has the blue background light. The tester can set the Upper and Lower limit Deviation value to judge the measured results. It has buzzer which can alarm automatically with sound.   The Portable Tablet Hardness Tester can store 10 test value It can convert three Units (N,Kgf,lbf) automatically. The data can roll over on the screen. Peak-Holding function, Peak-Automatic Discharge function and the discharge time can be set freely. This hardness tester has the RS-232 port output which can be used to connect it with PC for data transfer. If it connects to test stand, it can make the test stand stop moving when it reaches preset stop value.   FEATURES: Compatibility: Compact size and High Accuracy. It is easy to operate and handy to carry out. Real time Data Transfer: It can give the real time test results through RS-232 to PC. It can plot the test results in real time graph through corresponding software. Unit selection & Conversion: Convert three Units (N,Kgf,lbf) automatically. Parameter Measurements: The Portable Tablet Hardness Tester Measures the Hardness value of the tablets. Sequence Indicators: The portable Tablet Hardness Tester can set the Upper and Lower limit Deviation value to judge the measured results. It has buzzer which can alarm automatically with sound. Display: LCD with Backlit Display. Results Storage: This Portable Tablet Hardness Tester can store 10 test value. https://www.prolabworld.in/tabtest-301-digital-tablet-hardness-tester.htm https://www.prolabworld.in/tabtest-301-digital-tablet-hardness-tester.htm Thu, 15 Jul 2021 00:00:00 +0530 FEATURES: Compact Design & Easy to Operate. Precise and Reliable & Easy to Calibrate. 1.5  - 40.00 mm in same mechanism with measuring units either in mm /inch. (No need for extension module for thickness measurement). Number of tests for statistics: Up to 99 3 point calibration for Load cell Linearity Measurement.  Real time clock is incorporated to print test run time in the print out. Scope of supply inclusive of full working system with L - type Jaw and 10 mm block (non           calibrated). Keyboard with Numerical and Function keys. Parallel Printer (80 Column Dot Matrix), Built in 40 Column MINI DOT MATRIX Printer (On  site Upgradable), External 40 Column and RS 232 (Serial Ports for Service only). Calibration with certified weight 5, 10, 15 kg Requires no adjustments of the test jaws that are designed to suit all tablet     shapes and sizes with a unique grooved design for proper alignment of each tablet before testing. Ideal for Laboratories with limited bench space, the compact and light weight design is well suited for portability and use in a production setting. Adjustable for Linear force / linear speed increase.     Interface Ports: Parallel Printer (80 Column Dot Matrix), Built in 40 Column MINI DOT MATRIX PRINTER (On site Upgradable), External 40 Column and RS 232 (Serial Ports for Service Use only).  https://www.prolabworld.in/tablet-dissolution-testers.htm https://www.prolabworld.in/tablet-dissolution-testers.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/1918-tablet-dissolution-test-apparatus.htm https://www.prolabworld.in/1918-tablet-dissolution-test-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formulate in the development of therapeutically optimum dosage forms. The instrument is designed and manufactured for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the dissolution requirement of the Tablet and Capsule as per USP/IP standards.   Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process.   System is equipped with 4 line alphanumeric LCD display with backlit and 19 soft touch membrane type keys that provides a convenient interface for entering the data. Independent stirrer and platform keys on the front panel allow the user to easily start/stop stirrer movement or displacement of platform in the required direction at any time.   The instrument has the storage facility for 200 samples. The samples being analyzed are automatically stored in the memory in different batch and sample numbers. The system has three programming modes i.e. Routine, Sustain and Control mode. It has the facility for setting up 20 different test methods using Routine and Sustain modes which are retained in the memory even when the power is switched OFF. Provision has also been made for attachment of any dot matrix printer with centronics interface so that any of the stored setups/results can be printed.   The unit is provided with dissolution vessel with cover, having necessary arrangement to hold temperature sensor and the same is placed in the sturdy, acrylic water bath. The large spread out stainless steel heater ensures perfectly uniform heating. The instrument has dual channel temperature system with sensors to monitor the test temperature of dissolution vessel as well as that of the water bath.   The motorized platform’s (stirrer unit) up/down movement of the instrument improves the accessibility for sampling. Stirrer speed is accurately controlled and maintained at +1 rpm by microcontroller as per IP, USP specifications.   The elapsed time for the current ongoing test is retained in the instruments memory. In case of power failure during the run mode, when the instrument is switched On again, the user has the option to run the test from the point of the power failure.   Features : 8 Station (Model – 1918) Complies with USP, IP specifications Extremely Useful for Pharmaceutical Labs Highly Accurate and Easy to Operate Programmable Stirrer Speed Control i.e. (25 – 200 RPM) 20 x 4 Line Alphanumeric LCD with Backlit 19 Soft Touch Membrane Type Keys Three Programming Modes i.e. Routine, Sustain and Control 20 Independent Programmable Setups for Routine and Sustain Mode wit Storage Facility 200 Samples Storage Facility Printer Attachment Facility Audio Visual Indicators for System Status Easy to Empty & Clean the Water bath with Bottom Drainage Continuation of Last Sample Run in case of Power Failure     LED : 6 LED’s, 3 LED’s for Test status like Run, Alarm, End and 2 LED’s for Platform up/down status and one for heater ON/OFF status.   Prog. Mode: Routine, Sustain and Control mode. Facility for 20 different test setups available in Routine and Sustain mode.   Accessories: Main Unit with Acrylic Tank and Rectangular Cover Plate and Water Bath Temperature Sensor (T1) External Temperature Sensor (T2) for Vessel Reaction Vessel capacity 1000 ml. 8 Nos.  Round Acrylic Cover Plate with Hole and a large slit. 8 Nos. S.S. Paddle, S.S Wire Mesh Basket. 8 Nos.  Glass pipettes with rubber bellows Mains Lead, Instruction Manual, Dust Cover https://www.prolabworld.in/2914-2912-tablet-dissolution-test-apparatus.htm https://www.prolabworld.in/2914-2912-tablet-dissolution-test-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formulate in the development of therapeutically optimum dosage forms. The instrument is designed and manufactured for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the dissolution requirement of the Tablet and Capsule as per USP/IP standards.   Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process.   System is equipped with 4 line alphanumeric LCD display with backlit and 19 soft touch membrane type keys that provides a convenient interface for entering the data. Independent stirrer and platform keys on the front panel allow the user to easily start/stop stirrer movement or displacement of platform in the required direction at any time.   Features: 14 Station (Model – 2914) 12 Station (Model – 2912) Complies with USP, IP specifications Extremely useful for pharmaceutical labs Programmable stirrer control (25 to 200 RPM) 20 x 4 line alphanumeric LCD display with backlit 19 Soft touch membrane type keys 20 independent programmable setups for routine & sustain mode with storage 200 sample storage facility Printer attachment facility Audio visual indicators for system status Easy to empty and clean water bath with bottom drainage Continuation of last sample run in case of power failure   LED’s: 4 LED’s for different status indications. 3 LED’s for test status like Run, Alarm, End & 1 LED for heater ON/OFF status https://www.prolabworld.in/tablet-disintegration-testers.htm https://www.prolabworld.in/tablet-disintegration-testers.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/disintegration-tester.htm https://www.prolabworld.in/disintegration-tester.htm Sat, 14 Mar 2026 00:00:00 +0530 Features: Complies with USP, IP specifications Extremely useful for pharmaceutical labs Highly Accurate and Easy to Operate Baskets UP & DOWN movement as per IP/USP Specifications 20 x 4 Line Alphanumeric LCD with Backlit 15 Soft Touch Membrane Type Keys 20 Setups Storage Facility 200 Samples Storage Facility Printer Attachment Facility Audio Visual Indicators for System Status. https://www.prolabworld.in/tablet-disintegration-tester.htm https://www.prolabworld.in/tablet-disintegration-tester.htm Thu, 15 Jul 2021 00:00:00 +0530 Features: Compiles with USP, IP specifications Extremely useful for pharmaceuticals labs Highly Accurate and Easy to Operate Baskets ‘UP’ & ‘DOWN’ movement as per IP/USP Specifications 20*4 Line Alphanumeric LCD with Backlit Printer Attachment Facility Audio Visual Indicators for System Status Baskets are automatically lifted at the end of the test Capability for dual buffer disintegration test Audible, low water level alarms with indication on display for safety External Temperature sensors available for individual beaker Using the single keypad, the user can control every function from the length of the test to the water bath temperature. https://www.prolabworld.in/tablet-friability-testers.htm https://www.prolabworld.in/tablet-friability-testers.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/microprocessor-based-tablet-friability-test-apparatus.htm https://www.prolabworld.in/microprocessor-based-tablet-friability-test-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 Microprocessor Friability Apparatus, Model 1902 measures the tendency of a tablet to chip or breakdown to pieces when held under mechanical stresses. Instrument uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. System is equipped with 4 line alphanumeric LCD display with backlit and 16 number of soft touch membrane type keys. The friability tester can be operated using only one or two drums. The rotational speed of drums can be set at different speeds (20-60 RPM). The samples can be loaded conveniently without removing the drums and after the test completion the samples are automatically unloaded to the collection tray.   To eliminate the manual input of weight of samples the facility of connecting a weighing scale is also available. When weighing scale is connected the weight of samples is automatically recorded to the instrument from the weighing balance. The test can be performed in two different modes Time or Count mode. The instrument stores the test parameters, readings and results simultaneously in the memory which are retained even after the power is switched OFF. Provision has also been made for attachment of a printer so as to provide hard-copy printouts of test data, including the time, date and calculated results.   Features Complies with USP, IP specifications Microprocessor-based, easy to use 20 x 4 line alphanumeric LCD display with backlit 16 Soft touch membrane type keys Independent programmable setups for Time & Count mode with storage Password-protected user access Facility to attach with weighing balance Rs232 Printer attachment facility Automatically calculates percentage friability Loading and unloading of tablets without removing drums Power Failure detection facility User friendly operation with menus & current status indicators. https://www.prolabworld.in/digital-tablet-friability-test-apparatus.htm https://www.prolabworld.in/digital-tablet-friability-test-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 FEATURES:  Programmable Time with Digital Display Auto Stop after completion of Set Time with Alarm Auto removal of sample without opening the drum Precise control of RPM 25±1 https://www.prolabworld.in/humidity-chambers.htm https://www.prolabworld.in/humidity-chambers.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/sc100g-stability-chamber.htm https://www.prolabworld.in/sc100g-stability-chamber.htm Thu, 15 Jul 2021 00:00:00 +0530 PROLAB INDIA’S HUMIDITY/STABILITY CHAMBERS: FULLY GMP MODEL : 100LITRE Creating Ideal Conditions for Industrial Component/ Product Research And Bio  Technical Specification Test. Most Accurate and Reliable Chamber for Long Term High Temperature And RH Testing. Temp. Range 10°c To 60°c With An Accuracy ± 1 °c. Relative Humidity Range 35% RH To 98% Rh with an Accuracy ± 3% Rh. A Positive Vertical Air Circulation Ensures Temperature And Rh Uniformity. Digitally Set, Temperature and Humidity Controller with Direct Digital Read Out In Temperature and %RH. Low Pressure Boiler to Generate Steam for Chamber Humidification. Well Balanced Refrigeration System CFC Free. Inner Chamber made of S. S. 316, outer S. S. 304. The Chamber Is Provided With Modular Removable Shelves Made Of S. S.for Complete Flexibility In Use. A Key Lockable Insulated Door Having Positive Door Gasket Seals Doors Perfectly. Control Panel Mounted On The Top Of The Unit. It Work On 230 Volts A. C. only. https://www.prolabworld.in/sc450g-stability-chamber.htm https://www.prolabworld.in/sc450g-stability-chamber.htm Thu, 15 Jul 2021 00:00:00 +0530 PROLAB INDIA’S HUMIDITY/STABILITY CHAMBERS: FULLY GMP MODEL : 450LITRE Creating Ideal Conditions for Industrial Component/ Product Research And Bio Technical Specification Test. Most Accurate and Reliable Chamber for Long Term High Temperature And RH Testing. Temp. Range 10°c To 60°c With An Accuracy ± 1 °c. Relative Humidity Range 35% RH To 98% Rh with an Accuracy ± 3% Rh. A Positive Vertical Air Circulation Ensures Temperature And Rh Uniformity. Digitally Set, Temperature and Humidity Controller with Direct Digital Read Out In Temperature and %RH. Low Pressure Boiler to Generate Steam for Chamber Humidification. Well Balanced Refrigeration System CFC Free. Inner Chamber made of S. S. 316, outer S. S. 304. The Chamber Is Provided With Modular Removable Shelves Made Of S. S.for Complete Flexibility In Use. A Key Lockable Insulated Door Having Positive Door Gasket Seals Doors Perfectly. Control Panel Mounted On The Top Of The Unit. It Work On 230 Volts A. C. only. https://www.prolabworld.in/incubators.htm https://www.prolabworld.in/incubators.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/bod-incubator.htm https://www.prolabworld.in/bod-incubator.htm Thu, 15 Jul 2021 00:00:00 +0530 FEATURES : Designed for Biochemical Oxygen Demand (B.O.D.) Determination and other applications like preservation of vaccines, storage of sensitive cultures, microorganism, serum incubation etc. Double walled construction with backside triple, having Stainless Steel - 304 grade Interior & Exterior CRCA Steel with Powder Coat finish. Interior made of Stainless Steel–316 grade and Exterior of Stainless Steel 304 grade matt finish in all GMP Model. Castor wheels for easy movability. Units are highly insulated by Glass Wool between the walls to minimize the heat exchange. A key lockable Insulated door having magnetic gasket seals door gaps perfectly. A transparent full length Acrylic inner door is provided to have a clear inner view of the samples/specimens put in, without disturbing the Thermal Conditions inside the incubator. Illumination lamp fitted for clear visibility. Mechanical convection system (Motorized Blower) ensures even air distribution within the chamber. Heating by long life 'U' type S.S. tubular heaters. Cooling is done by CFC Free Hermetically sealed Emerson Copland make compressors utilizing R-134 A an eco-friendly refrigerant. Adjustable & removable SS rod type shelves. Temperature controlled by Dual Display Microprocessor based PID Temp. Controller with & PT – 100 sensor. https://www.prolabworld.in/bacteriological-incubator.htm https://www.prolabworld.in/bacteriological-incubator.htm Thu, 15 Jul 2021 00:00:00 +0530 FEATURES & SPECIFICATIONS:  Double-wall construction with Inner chamber made of Stainless Steel – 304 Grade Exterior of CRCA steel with powder coat finish. High density glass wool insulation between walls to prevent heat dissipation. Heating elements are made of high grade Nichrome wire and placed at the bottom, of the unit. A transparent full length Acrylic inner door is provided to have a clear inner view of the samples Temperature Range: 5°C above ambient to 60°C. Temperature controlled by Capillary Thermostat with +/- 2°C Accuracy. Gravity convection & Shelves are made of Galvanized wire mesh. Operates on 230 Volts AC Single phase 50 Hz. https://www.prolabworld.in/karl-fischer-titrators.htm https://www.prolabworld.in/karl-fischer-titrators.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/digital-microprocessor-based-automatic-karl-fischer-titration-apparatus.htm https://www.prolabworld.in/digital-microprocessor-based-automatic-karl-fischer-titration-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 FEATURES:  Microprocessor K.F Moisture Titrator (GRAPHICAL DISPLAY), with built-in magnetic stirrer Auto computation of moisture in ppm, %age and mg of water.  Simultaneous display of Results in all three Units,  1000 sample Storage of date, time batch no.  Final results are flashed on premium graphical LCD.  K.F. Reagent dispensing by motorized process. External dot matrix printer & USB pc attachment facility available. User friendly ICON BASE MENU Navigation foe easy operation.    Accessories: Dual Platinum Electrode, Teflon Coated Magnetic Stirring Capsule, 250ml Bottle for K.F Reagent, Methanol, Calcium Chloride, Reagent Outer, 25µl Auto Pipette, Adapter for Calcium Chloride Bottle, Adaptor for K.F. Reagent Bottle, Set of connecting tubes, Titration Vessel, Set of Dispensing tubes & nozzels, Power Supply Adaptor, Rubber Bellow, Instruction Manual, Dust Cover. https://www.prolabworld.in/digital-microprocessor-based-automatic-karl-fischer-titrator.htm https://www.prolabworld.in/digital-microprocessor-based-automatic-karl-fischer-titrator.htm Thu, 15 Jul 2021 00:00:00 +0530 Microprocessor KF Moisture Titrator – 1760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H2O.   The system has 24 soft touch membrane type keys for ease of operation. Complete numeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. comfortable. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It has the storage facility of date, time, batch no. and final results of 20 titrations using the FIFO method. The internal battery backup provision has been made to store the results and the other titration parameters for a minimum of 1 month even if the instrument is not switched ON. Provision for external printer attachment is available so that any of the stored results can be printed even at a later stage.   Accessories: Dual Platinum Electrode, Built-In Magnetic Stirrer, 250ml Bottle for Methanol, 10 Syringe, Adapter for KF Reservoir, Set of Dispenser Tubes, Bottle Container, Dust Cover, Titration Vessel with Teflon Cover, Teflon Coated Magnetic Stirring Capsule, 250 ml Reservoir Bottle for KF Solution, 250 ml bottle for Calcium Chloride, Adapter for Methanol Reservoir Bottle, Set of Connecting Tubes, Main Lead, Instruction Manual   FEATURES: Auto Computation of Moisture in ppm, %& mg H2O. Storage of Date, Time, Batch No. and Final Results 8-Digit Digital Display Motorized Dispensing External Printer Attachment Facility https://www.prolabworld.in/melting-point-apparatus.htm https://www.prolabworld.in/melting-point-apparatus.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/microcontroller-visual-melting-point-apparatus.htm https://www.prolabworld.in/microcontroller-visual-melting-point-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 Accessories: Box of Capillaries (set of 100), Glass Tubes for Liquid Sample (6×75 mm),Magnetic Capsule, Bottle of silicon oil (250 ml), Glass Cylindrical Beaker and Teflon Cover for beaker fitted with immersion heater, Coloured TFT Monitor, High resolution camera (In built), Instruction Manual   FEATURES: Graphical LCD display, colored TFT screen with high resolution Camera Extremely Useful for Pharmaceutical Industry Highly Accurate and Easy to Operate Digital Resolution for Temperature 0.1°C Silicon Oil-Bath and In-built Magnetic Stirrer for Uniform Heating 3 Tire Password Protection Facility (Admin, Supervisor and User) Online/Offline Printing facility with real time and date User selectable Ramp Rate and Plateau Rate Facility for unknown/new product evaluation by Rapid Melt Method Up to 5 Point Temperature Calibration using Point to Point or Polynomial Method Validation Available as per Pharma Compliance https://www.prolabworld.in/digital-melting-point-apparatus.htm https://www.prolabworld.in/digital-melting-point-apparatus.htm Thu, 15 Jul 2021 00:00:00 +0530 Melting Point Apparatus with TFT display & 4 digit LED display is designed for accurate measurement of melting points and for checking the melting range of the solid samples. The apparatus consists of a silicon oil-bath of about 200 ml capacity, covered with a teflon cover with 5 holes, fitted with a special type of oil immersion heater and having three holes for holding the capillaries, one for boiling point tube and one for the thermometer. It is supplied with high resolution camera & TFT display screen to view sample in capillaries.   FEATURES: Extremely Useful for Pharmaceutical Industry Highly Accurate & Easy to Operate Available TFT Screen with High Resolution Camera for Viewing Capillaries 4 Digit 7-Segment LED Display Digital Readout for Temperature 0.1 °C Silicon Oil-Bath and In-built Magnetic Stirrer for Uniform Heating Glare-free Illuminator and Large Magnifier for Stainfree Observation   Oil-Bath: Silicon oil-bath beaker 200 ml capacity with Teflon cover fitted with oil immersion heater. It has three holes for holding the capillaries, boiling point tube and thermometer.   Accessories: Box of Capillaries,  Glass Tubes for Liquid Sample (6x75mm) -2 Nos.,  Magnetic Capsule, Bottle of Silicon Oil – 250ml, Glass Cylindrical Beaker with Teflon cover for beaker fitted with immersion heater, Operation Manual, Dust Cover https://www.prolabworld.in/laboratory-ovens-furnaces.htm https://www.prolabworld.in/laboratory-ovens-furnaces.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/hot-air-oven.htm https://www.prolabworld.in/hot-air-oven.htm Mon, 19 Jul 2021 00:00:00 +0530 Description: Hot Air Oven – Plov-g Series “gmp Model”, Bottom Heater :Hot Air Ovens Are Sturdy Double Walled Units. Inner & Outer Chamber Made Of S.S. Steel GRADE304 or better. Gap Between The Walls Fitted With Glass Wool Insulation To Avoid Heat Loses. Heating Elements Are Made Of High Grade Chrome Plated Nicrome Wire. •Temp. Is Controlled By Thermostat. Temp. Range 50°c To 250°c And Accuracy: ±2°c (with digital accuracy ±1°c) Air Ventilations Is Provided On The Top Of The Unit To Remove The Hot Gases / Fumes. In Lab Type Oven Heaters Are Placed In The Bottom Side Of The Unit. All The Control Switches & Pilot Lamps Are Fitted On The Front Panel. Trays Should Be Supplied With G.i.wire Mesh.   Optional Accessories: Air Circulation Fan for Uniform Temperature. Digital Temperature Controller cum indicator in lieu of thermostat with an    accuracy ±1°c. S.S. Trays. https://www.prolabworld.in/muffle-furnace.htm https://www.prolabworld.in/muffle-furnace.htm Mon, 19 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/laminar-air-flow.htm https://www.prolabworld.in/laminar-air-flow.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/electrochemistry-instruments.htm https://www.prolabworld.in/electrochemistry-instruments.htm Thu, 22 Jul 2021 00:00:00 +0530 https://www.prolabworld.in/microprocessor-based-digital-ph-meter.htm https://www.prolabworld.in/microprocessor-based-digital-ph-meter.htm Thu, 15 Jul 2021 00:00:00 +0530 Features: Simultaneous display of pH, mV, temperature, calibration type and sample number. Automatic shift to manual mode of temperature compensation in case the temperature is more than 100°c for pH measurement. Icon-based graphical menu for easy navigation. USB interface for transferring data to PC. Large font size of pH for easy reading of pH data. Display of stored data of GLCD with date and time. https://www.prolabworld.in/microprocessor-based-digital-conductivity-meter.htm https://www.prolabworld.in/microprocessor-based-digital-conductivity-meter.htm Sat, 14 Mar 2026 00:00:00 +0530 Features : 128x64 Dots Graphical Lcd Display Ec, Tds, Salinity & Temperature Measurements Auto Temperature Compensation Auto Ranging Facility Programmable Ref. Temp & Temp Coeff In Ec Mode 1000 Samples Storage Facility Printer Attachment Facility    RANGE Conductivity 0.00 to 1000ms 6 ranges TDS 0.0 ppm to 1000 ppt Auto ranging SAL 0.0 ppt to 50 ppt Auto-ranging https://www.prolabworld.in/microprocessor-based-ph-ec-tds-meter.htm https://www.prolabworld.in/microprocessor-based-ph-ec-tds-meter.htm Fri, 16 Jul 2021 00:00:00 +0530 Microprocessor Based pH-EC-TDS Meter model 1615 is a solid state instrument designed for precise pH, EC, TDS and Temperature measurements. The instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enchanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process.   The instrument has 8 soft touch membrane type keys for ease of operation. It has the storage facility for 1000 samples, which are retained in the memory even when the system is switched Off. Provision has also been made for attachment of any dot matrix / thermal printer with serial RS 2323 interface so that any of the stored result can be printed.   The instrument is extremely useful for chemical & pharmaceutical inustry, agriculture and soil laboratories, swimming pools, water quality control in boiler feed water, water works department, fertilizer plants, petroleum refineries, breweries, water purification plants etc.   Features: 128 x 64 dots Graphical LCD Display pH, EC, TDS & Temperature Measurements Auto Temperature Compensation Auto Buffer Recognition in pH Mode Programmable Ref. Temp & Temp. Coeff in EC Mode 1000 Samples Storage Facility Attachment for Serial Dot Matrix/Thermal Printer   Accessories: pH Combination Electrode, pH Buffer Tablets (4.00 & 7.00 pH), Conductivity/TDS Cell, Temperature Probe, Electrode Stand, 12V Adaptor, Operation Manual, Dust Cover. https://www.prolabworld.in/leak-test-apparatus.htm https://www.prolabworld.in/leak-test-apparatus.htm Sat, 14 Mar 2026 00:00:00 +0530 Features: Extremely Useful for Packing Industry Ideal for Leak Testing of Strips, Blisters & Sachets Microprocessor-Based, Easy to Use 20 x 4 Line Alphanumeric LCD with Backlit Soft Touch Alphanumeric Mobile Keypad Programmable Vacuum & Hold Time Selectable Pressure Units 5 Setup Storage Facility Last Result Storage Automatically Printer Attachment Facility Supplied in SS body   Accessories: Main Apparatus along with vacuum pump Polycarbonate desiccator along with connecting tube Instruction Manual